Renkforce 1423363, Operating Instructions Manual

Page: 55 / 132

55
Switching the alarm function on/off
Method 1:
• Push the button “
TIME ” ( A5 ) several times until either the alarm time “ AL1 ” or “ AL2 ”
is displayed ( D1 ), depending on which alarm time you want to switch on or off.
• Briefly push the button “
ALARM
” (
A6
) to activate or deactivate the desired alarm
function. When switching on the projection radio alarm clock will emit two beeps;
when switching off, it will emit one.
Method 2:
• Both alarm functions can be switched on and off in sequence as well.
• For this, the projection alarm clock must be in regular mode. Push the button “
TIME ”
( A5 ) several times until the date is displayed ( C12 ).
• Briefly push the button “ ALARM ” ( A6 ) several times, until the desired alarm time is
switched on or off. When switching on the projection radio alarm clock will emit
two beeps again; when switching off, it will emit one. When both alarms are off, the
following sequence will apply for every push of the button “ ALARM ” ( A6 ):
alarm 1 on; alarm 2 on; alarm 1 and alarm 2 on; both alarms off;
The following applies to both methods:
• A small bell symbol will appear next to the minutes display, indicating which of the
alarm times is on:
D2 Alarm time 1 on
D3 Alarm time 2 on
D2+D3 Alarm times 1 and 2 on
No symbol Alarm function off