32
c) Operating Modes without DMX-Controller
• Press MODE/ESC (1) repeatedly until nAFL, nAFA, nStS, nSTC or SLAU appears.
• Select the desired standalone operating mode with the buttons UP (2) or DOWN (3) and confirm your
input with the button ENTER (4).
nAFL = standalone mode at low speed
• The display indicates SLoU.
• The movements and light effects are executed at low speed.
nAFA = standalone mode at low speed
• The display indicates FASt.
• The movements and light effects are executed at high speed.
nSTS = Sound-to-Light mode
• The display indicates SrUn.
• In Sound-to-Light mode, the moving head reacts to the music signals that are detected by the integrated
microphone. This causes the moving head to generate a light show in time to the music.
nSTC = Automatic mode
• The display indicates CrUn.
• The light effects are controlled by the integrated controller.
SLAU = Slave mode
• The display indicates Son.
• The light effect can be used as a unit in a master-slave chain. In that case, the integrated controller of
the master device controls the connected slave devices.
• The connection of this kind of master-slave chain is described in „Setup of a master-slave chain“.
• The master unit works in automatic or sound-to-light mode in this operating mode and controls the slave
devices synchronously.
