MODEL SCPA
LOCKING SCREW
MODEL SCP
LOCKING SCREW
Application SCP/SCPA
The model “SCP” clamp is capable of handling steel plates from the hor-
izontal through a hundred and eighty degree arc and may be used for
handling plate at rolling and forming machines. Refer to Illustrations
shown below. The adjusting screw is used to adjust clamp for various
thicknesses of material and attach the clamp to members being lifted.
The model “SCPA” has the same capabilities as the “SCP”, except the
“SCP” is limited to 10 degrees side-loading on the shackle. The “SCPA”
incorporates a pivoting shackle permitting 90 degrees side-loading. Re-
fer to Definition Pages for explanation of “Screw Locking” clamp. The
clamp features a spring-loaded pivoting cam jaw that “cams in” when a
load is applied to the lifting shackle.
For identification of component parts, refer to exploded view of clamp
located at the end of the Maintenance Section.
