Renfert Silent TS 2921-0050, Instruction Manual

Page: 17 / 18

- 11 -
D.2 Connecting a Dust-
Generating Device
The unit is equipped with a power outlet on the back,
designed for a two-contact plug with a ground contact
[ \J|‰|| €K?
which dust-generating equipment can be connected
[?$&|K
A suitable plug is supplied for units with a nomi-
nal voltage of 230V and plug socket according to
J|‰||[)&(K+
] &$&
This adapter may only be made by a quali-
;
The adapter must not interrupt the ground
circuit system!
E. Repairs
# $ -
cians or authorized dealers.
J& $ ? -
tective gear may need to be worn during repairs.
F. Disposal Information
F.1 Disposing of Consumables
)&$ •& -
$ • -
ance with locally applicable regulations.
J& $ ? -
tective gear may need to be worn during disposal.
F.2 Disposing of the Unit
The unit must be disposed of by an authorized recy-
& +$
of all possibly health-hazardous residues in the unit.
F.3 Disposal instructions for
countries in the EU
To conserve and protect the environment, prevent
environmental pollution and improve the recycling of
raw materials, the European Commission adopted
a directive that requires the manufacturer to accept
the return of electrical and electronic units for proper
disposal or recycling.
Within the European Union units with this symbol
should not therefore be disposed of in unsorted do-
mestic waste:
For more information regarding proper disposal ple-
ase apply at your local authorities.
< = >
Mains voltage: 230 V, 50/60 Hz
100-120 V, 50/60 Hz
J \ Q |UUj[(U‡K
1400 W (120 V )
1000 W (100 V)
\
connecting value:
2000 W (230 V)
360 W (120 V)
500 W (100 V)
Total connected power: 3400 W (230 V)
1800 W (120 V)
1500 W (100V)
€[$&|?=KQ Y[+K
Sound pressure level in accord. with
J|YX(Y Z\Q
X(}[K
Z\?Q ((UU'[U‡'(U‡K
2900 l/min (100 V)
‡ ?Q U]_‘‰’
) ?$ $ Q Uˆ˜
)!?&Q Y
_\ &Q ‘ˆ|’
Dimensions
[&\KQ
Y‰YYYXY
‘(|ˆˆ’
j&[KQ X]&
™$&Q
Q
(Y‘ˆ’
Q |U‘Y’
H. Liability Exclusion
Renfert GmbH shall be absolved from all claims for
damages or warranty if:
? =
other than those cited in the operating
instructions;
? =
those alterations described in the operating
instructions;
? =
authorized facility or if any but Renfert OEM
parts are employed;
? =
obvious safety faults or damage;
? = J
impacts or is dropped.