en
6 Monitor
The following explanations in Chapter 6 apply only to the monitor that is included in the scope of
delivery for item no. 2400 3000.
If you use a different monitor, follow its safety instructions and instructions for use.
Renfert recommends not changing the factory settings of the monitor as the basic settings for the
EASY view+ 3D�
6.1 Safety instructions
Commissioning
► Do not close off the ventilation openings.
►
Place the monitor in a well-ventilated place to avoid overheating.
► Only use accessories specified by the manufacturer or included with the monitor.
►
Select a location where the monitor will not be exposed to extreme temperatures, high humidity,
direct sunlight or dusty environments. Avoid proximity to equipment that generates strong mag
-
netic fields.
Water and moisture
► Do not operate the monitor near water. To reduce the risk of fire and electric shock, do not expose
the monitor to rain or moisture.
Power cord and power cord connection
►
Install the power cord so that it will not be walked on or damaged. Take into account the location
of the cables, plugs, sockets and connector on the monitor.
Product care
► Do not touch the screen directly with your fingers. Grease from the skin can also leave finger
-
prints on the screen, which are difficult to remove and can damage the screen. Do not put any
pressure on the screen.
Cleaning
►
Clean only with a dry cloth.
Repair
►
Do not repair the monitor yourself. High voltages exposed when the cover is opened or removed.
There is a danger of electrical shock. Repairs must be carried out by qualified personnel only.
Lightning strike
►
For extra safety during a thunderstorm, or when the monitor is left unattended or unused for a
long time, unplug the power cord of the power supply and the monitor cable. This prevents dam-
age to the monitor due to lightning strikes and power surges.
Mains connection
►
Do not remove earth or protective conductor connection from the mains plug of the power supply
unit.
►
Unplug the power supply unit when the monitor is not used for an extended period of time, or if
the power cord, power plug, or monitor housing is damaged.
Caution
►
Do not try to open the product. Any attempt to open the product or remove the cover will void the
warranty and may result in serious injury.
6.2 Connections
40
DC 12 V 3�33 A
41
DVI input
42
VGA input
6.3 Operation and settings
8
Power switch
43
Menu, opens the monitor menu
44
Signal source selection� Reduce the selected value in the
monitor menu
45
Adjust brightness� Increase the selected value in the monitor
menu
46
AUTO, automatic horizontal and vertical adjustment of the
image� Also to exit the monitor menu
Fig. 27
40
41
42
Fig. 28
8
46
45
44
43
- 16 -
