EN
►
The device may only be plugged into outlets which are connected to the protective conductor
system.
►
The mains plug must be easily accessible.
► Disconnect the device from the mains before carrying out work on the electrical parts.
► Check connection cables (such as power supply cords), tubes and housing (i.e. the key-pad)
regularly for damage (i.e. kinks, cracks and porosity) or signs of ageing. Devices with damaged
connection cables, tubes or housing parts or other defects must not be operated!
► Defective devices must be put out of service immediately. Remove the mains plug and ensure the
device is not used. Send the device for repair!
►
Only operate the device under supervision.
►
Please observe the national accident prevention regulations!
►
It is the responsibility of the operator that national regulations during operation and regarding
a repeated safety inspection of electrical equipment are complied with. For Germany these are
the regulation 3 by DGUV (German Statutory Accident Insurance) in relation with VDE 0701-0702
(Association for Electrical, Electronic and Information Technology).
► Information on REACH and SVHC is available on our website
www.renfert.com, in the Support
area.
Specific Information
► The mains socket on the device is only designed for purposes specified in the operating instruc
-
tions. Connecting other devices may cause material damage.
► Please observe the national regulations and permitted exposure to dust in a working environment.
Please ask the “National Institute for Occupational Safety and Health” or other responsible au
-
thority.
► Always refer to the relevant safety data sheets, when extracting hazardous materials.
► Always wear protective gear, when extracting hazardous materials.
►
It is necessary to wear suitable personal protective equipment when emptying the dust drawer or
cleaning, depending on the type of extracted material.
► When disposing of the extracted material or used filter, please observe the local specifications
and accident prevention regulations!
► Make sure the dust drawer is fully closed during operation.
► Do not operate without a suction hose.
► Do not extract flammable or explosive gasses, fumes or dust.
► Do not extract hot materials.
► Do not extract liquids.
►
If the dust extractor is employed to extract hazardous materials, appropriate personal protective
gear must be worn and steps must be taken to ensure that the exhaust air is properly ventilated.
Please refer to the associated safety data sheets for specific requirements.
► Dispose of extracted material according to local statutory regulations.
Authorized Persons
Operation and maintenance of the device may only be performed by qualified personnel.
Product Description
Components Groups and Functional Elements
See Fig. 1 (on inside cover)
1
SILENT EC2 / TC2
2
Control panel
3
On / Off switch
4
Dust drawer
4A
Clamp fastener
5
Fine filters
6A
Suction port channel A
6B
Suction port channel B
7
Velcro® strip
8A
Device socket A
8B
Device socket B
9
Mains cable
10
Protective device switch (2 x)
11
Exhaust air filter / Exhaust air outlet
12
Suction tube and end bushings
13
Compressed air connection tube
(incl. compressed air filter)
14
Connection set
- 2 -
Summary of Contents for 29360000
