Renfert 29300050, Quick Start Manual

Page: 12 / 72

EN
Select vacuum channel
Start / stop suction turbine and open / close corresponding
pinch valve valve:
• Automatically:
The electrical appliance connected to the coupler socket
(9, Fig. 1) is activated / deactivated.
• Manually:
By pressing a suction hose button (39).
Adjust suction power
Set the extraction force:
• Button (43), increases extraction force.
• Button (41), reduces extraction force.
Programming
For the extractor programming instructions, please see enclosed
Quick Reference Card and full set of operating instructions on the
internet.
Cleaning / Maintenance
Wipe the product down with a slightly damp cloth.
Replacing the Dust Bag
It is essential to change the dust bag when indicated as follows
on the product display:
The set dust bag fill level has been reached:
♦ The dust drawer symbol blinks.
♦ An audible signal will be emitted 3 x.
♦ The display blinks “Cod01”.
Emptying the dust drawer:
⇒ Switch the extractor off.
⇒ Pull the front panel forward and off (5, Fig.1).
⇒ Pull the dust drawer (7) out towards the front.
⇒ Remove the protective film from the glue flap and use it to
cover the dust bag opening!
⇒ Dispose of the dust bag properly.
⇒ Insert a new dust bag into the dust drawer. Ensure that the
new dust bag is properly aligned in the guide grooves (21)
and the glue flap faces upwards.
Use only original Renfert dust bags (see spare parts list).
⇒ Inspect the dust drawer seal for damage and replace it, as
required (24).
⇒ Insert the dust drawer, making sure it is straight, and push it
in as far as it will go. Make sure that the dust drawer is seat-
ed correctly on the guide (23).
⇒ Install the front panel on the bottom hooks then push it into
the upper lock bolts, pressing firmly until it locks in place.
MENU
A B
A B
39
MENU
A B
OFF
ON
A B
43
41
22
23
7
21
24
- 4 -