While using for ZcoRE3(20)-2400, precaution below is necessary:
PRECAUTION
1. The installed antenna must not be located in a manner that allows
exposure of the general population at a distance of less than 4cm.
2. Mount the antenna in a manner that prevents any personnel from
entering the area within 4cm from the central position of the antenna.
3. It is recommended that the installer place radio frequency hazard
warnings signs on the barrier that prevents access to the antenna.
4. Prior to installing the antenna to the antenna connector, make sure the
power is adjusted to the settings specified in section of this manual.
5. During antenna installation, be sure that the power to the equipment is
turned off in order to prevent any energy presence on the coaxial
connector.
This manual contains information of proprietary interest to REnex Technology Limited. It has
been supplied in confidence to purchasers and other authorized users of the ZcoRE3-2400
module, and by accepting this material, the recipient agrees that no part of the document
shall be reproduced or transmitted in any form or by any means, without prior written consent
of REnex Technology Limited.
Information in this document is subject to change without notice.
REnex Reference Number:
Print Date: Feb. 2007
© 2006-2010 REnex Technology Limited. All rights reserved.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
HyperTerminal is copyrighted by Hilgraeve Inc, and developed for Microsoft.
All other products mentioned in this document are trademarks or registered trademarks of their respective
holders.
