SHIPPING, RIGGING, LIFTING AND ASSEMBLY: LE MODELS
RENEWAIRE.COM
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
1.800.627.4499
2
IMPORTANT SAFETY INFORMATION
WARNING
RISK OF DEATH 0R SERIOUS INJURY
Hoisting heavy equipment overhead is inherently dangerous.
Failure to properly rig the ERV for hoisting or the use of incorrect
rigging equipment may result in the ERV falling during hoisting.
Improper work procedures may result in death or serious injury
to workers. Rigging, hoisting and assembly are to be performed
by skilled and experienced personnel. OSHA-approved work
guidelines are to be strictly followed.
Before proceeding with installation, read all instructions,
verifying that all the parts are included.
The information in this manual is provided as a guideline and
does not neccessarily meet all local codes. It is the installer’s
responsibility to comply with all local codes and OSHA-approved
safety practices.
RISK OF DAMAGE TO ENTHALPIC CORES
Whenever working within the ERV cabinet, protect the enthalpic
cores from accidental damage. The core media is subject to
damage from dropped tools or other foreign objects.
RISK OF DAMAGE TO ERV CABINET
Incorrect lifting can cause damage to the unit.
Do not lift joined unit by the 4 corner lifting lugs only. Secure
lifting cables to the center lifting lugs also.
All lifting lugs provided must be used. Never lift the unit or
modules from the top of the unit.
This unit is intended for general ventilating only. Do not use to
exhaust hazardous or explosive materials and vapors. Do not
connect this equipment to range hoods, fume hoods or collection
systems for toxics.
This unit is for ventilating finished structures only. It is not to
be used until after all construction has been completed and
construction debris and dust are cleaned from the Occupied
Space.
Do not lift joined unit by the 4 corner lifting lugs only. Secure
lifting cables to the center lifting lugs also.
All lifting lugs provided must be used. Never lift the unit or
modules from the top of the unit.
Incorrect lifting can cause damage to the unit.
This equipment is to be installed by following Industry Best
Practices and all applicable codes. Any damage to components,
assemblies, subassemblies or the cabinet which is caused by
improper installation practices will void the warranty.
NOTICE
NOTICE
NOTICE
NOTICE
NOTICE
NOTICE
IMPORTANT
IMPORTANT
If this unit is installed in an area where it may draw air from
a nearby fuel-burning device such as a gas furnace or water
heater, verify that the air being extracted by the ERV does not
conflict with proper operation of the fuel-burning device.
This unit can be delivered in two modules for on-site assembly
or as a completely assembled unit (additional charges apply).
See separate unit-specific Installation, Operation and
Maintenance manual for further information.
