1.800.627.4499
14
HE-Series Outdoor
ERV
SHIPPING/RECEIVING
3.1 UNIT WEIGHTS AND DIMENSIONS
3.1.1 Unit Dimensions and Weight:
86" L x 33 1/4" W x 56 1/4" H
387-548 lbs., varies by option(s)
3.1.2 Maximum Shipping Dimensions and Weight:
70" L x 47" W x 83" H
615 lbs.
3.2 RIGGING AND CENTER OF GRAVITY
3.0 SHIPPING/RECEIVING/HANDLING
HE1.5XRT units are palletized at the factory and then shipped by common carrier. Upon receipt
by the installer, the shipment should be inspected for shipping damage, prior to unloading.
Any discovered shipping damage should be immediately reported to the RenewAire sales rep
and the damage must be recorded on the Bill Of Lading, prior to signing for acceptance of the
shipment. The unit can be handled with a fork lift or a crane. Prior to moving the unit, verify that
all latches and securing bolts on the cabinet doors are tightly fastened.
If a crane is used for moving the HE1.5XRT unit, unscrew the sheet metal plates that hold the
adjustable legs to the pallet. Use two hoisting slings and a spreader bar to hoist the unit. The
hoisting slings must be positioned around the ends of the unit so they do not touch the unit
doors. Unit hoisting weights and Center of Gravity are detailed in Sections 3.1 and 3.2 in this
manual.
Perform a test lift to make sure the unit is being hoisted level and is secure.
Place the HE1.5XRT unit on a flat surface where it will be protected from the weather and
incidental damage. Do not remove protective coverings from any duct openings and keep the
doors secured and tightly closed.
2.6 FACTORY INSTALLED OPTIONS
All HE1.5XRT units can be ordered with factory installed options. See Unit Configuration Code
on page 10.
Options will have supplemental manuals shipped with the unit.
For EC Motor option, see
EC Motor Supplemental Manual
.
For Commercial Controls, see
Commercial Controls Supplemental Manual
.
For Filter Alarm, see
Filter Alarm Supplemental Manual
.
For Isolation Dampers, see
Isolation Dampers Supplemental Manual
.
For Variable Frequency Drives, see
VFD Supplemental Manual
.
3.2.1 HE1.5XRT Hoisting Weights and COG
There are pairs of rigging holes at each lower corner of the unit. Use slings or shackles at all
four corners. Spreader bars are recommended in order to avoid damage to the unit.
