1.800.627.4499
14
EV-Series Premium
ERV
UNIT PLACEMENT
2.7
CONTROLS TERMINAL STRIP
A single terminal strip is located at the end of each EV Premium, providing a 24 VAC connection
to Boost mode or to control accessories. For detailed information, see the Low Voltage Wiring
Diagrams in Section 4.8 of this manual.
FIGURE 2.7.0 CONTROLS TERMINAL STRIP
3.0 UNIT PLACEMENT
RenewAire recommends installation of the EV Premium by a professional HVAC installer with
knowledge of local building codes who is able to properly balance the air streams prior to use.
The EV Premium can be installed by one person.
www.renewaire.com (800) 627- 4499
24 VAC
COMMON
HIGH SPEED
(BOOST) MODE
120 VAC LINE
CORD
2.6 FILTERS
Each EV Premium is equipped at the factory with mesh-type anti-microbial MERV 8 filters on
both the OA and RA sides of the core. If desired, the mesh-type OA filter can be replaced with
an optional MERV 13 pleated paper filter accessory, which will ship loose.
FIGURE 2.6.0 EV PREMIUM FILTER LOCATIONS
www.renewaire.com (800) 627- 4499
OA FILTER (FILTERS THE INCOMING
OUTDOOR AIR FOR USE IN THE OCCUPIED
SPACE AND ALSO PROTECTS THE CORE).
THIS FILTER CAN BE REPLACED WITH A
PLEATED PAPER MERV 13 FILTER.
RA FILTER (PROTECTS THE
CORE FROM DUST AND DIRT
BEING CARRIED BY THE RETURN
AIRSTREAM)
UNIT PLACEMENT
