67
Fig. 4-26 New Project - Step Finish
z
When you finished setting all entries on the New Project dialog box, the contents you
’
ve set are displayed
here. If the contents shown here are correct, click the [Finish (F)] button. If incorrect, click the [Back (B)]
button and reedit any entries that need to be corrected.
4.2.3.2 Opening a Project
Open an existing project file.
When you choose this menu command, a dialog box for opening files is displayed. From this dialog box, choose the
project file you want.
Fig. 4-27 Opening a Project
z
Choose a project file (any file name with the extension
“
.tmk
”
).
z
Click the [Open] button, and the project of the selected file opens.
z
Project files of TM V.2 or earlier versions (any file name with the extension
“
.mtm
”
) can be specified here.
Also, makefiles can be specified.
If a project file or makefile of TM V.2 or earlier version is specified, a project complement wizard is executed. Set
up following the instructions displayed.
4.2.3.3 Saving the Project by Overwriting
Save the project being worked on to the current project file by overwriting.
Summary of Contents for TM V.3.20A
Page 90: ...90 MEMO...
Page 92: ......
