69
A history of up to four projects is displayed.
4.2.3.7 Exiting the Application
Exit the Project Editor.
If the project being worked on has been edited, a message is displayed asking you to confirm whether or not to save.
Fig. 4-30 Confirming to save
z
To save the project before closing it, click the [Yes] button.
z
To close the project without saving it, click the [No] button.
z
To cancel closing the project, click the [Cancel] button.
4.2.3.8 Toolbar
Show or hide the toolbar.
The toolbar is displayed when this menu command is checked, and not displayed when this menu command is
unchecked.
4.2.3.9 Status Bar
Show or hide the status bar.
The status bar is displayed when this menu command is checked, and not displayed when this menu command is
unchecked.
4.2.3.10 Adding an Item
Add an item to the generation procedure.
When you choose this menu command, an Add Item dialog box is displayed. From this dialog box, specify the item
name you want to add.
Fig. 4-31 Adding an Item
z
For
Item name:
, specify the item name you want to add. It is added below the selected item on the generation
procedure view.
z
Check [Add at top], and the item is added at the level equivalent to that of
all
or
clean
, not below the selected
item on the generation procedure view.
4.2.3.11 Adding a File
Add a file to the generation procedure.
When you choose this menu command, an Open File dialog box is displayed. From this dialog box, specify the file
you want to add.
Summary of Contents for TM V.3.20A
Page 90: ...90 MEMO...
Page 92: ......
