Renesas Single-Chip Microcomputer M37900T2-RPD-E, User Manual

Page: 35 / 52

( 35 / 52 )
IMPORTANT
Note on Self-check:
• If the self-check does not result normally (excluding target status errors), the
emulation pod may be damaged. Contact your local distributor.
(2) If an Error is Detected in the Self-check
If the self-check does not result normally (ERROR 1 and ERROR 2 in Figure 4.3), check the
following.
• Check the connection of the emulation pod and the PC4701.
• Check the connection of the emulation pod and the pod probe.
• Redownload the proper firmware.
• Check if the switches in the pod probe are set same as the factory-setting (refer to the user's
manual of the pod probe).