RZ/A2M SUB Board RTK79210XXB00000BE
2. Function specifications
R20UT4398EJ0100 Rev.1.00
2-1
2018.10.11
2.
Functional Specifications
2.1
Overview of Functions
Table 2.1.1 lists function modules of RTK79210XXB00000BE.
Table 2.1.1
Function Modules of RTK79210XXB00000BE
Section
Function
Description
•
RZ/A2M
pin functions used in the RTK79210XXB00000BE
.
Memory
•
SDRAM: 64 Mbytes x 1
- ISSI S42S16320F-7TL
•
EEPROM: 16 KBytes x 1
- Renesas R1EX24128ASAS0A
•
NAND flash memory: 128 MBytes x 1 is possible to mount on the board
pattern.
- Cypress S34ML01G100TFI000
USB interface
Connection for the RZ/A2M USB2.0 host/function module and USB connector
Serial interface
Connection for the RZ/A2M FIFO internal serial communication interface
(SCIFA) and RL78-intermediate USB Micro-B connector
Interrupt switch
Connection for the RZ/A2M NMI pin, IRQ0 pin, and push switch
Clock configuration
System clock configuration
Reset control
Reset control for the RZ/A2M CPU board and devices installed on the
RTK79210XXB00000BE
Power voltage configuration
System power supply configuration for the
RZ/A2M CPU board and RTK79210XXB00000BE
Audio interface
Connection for the RZ/A2M
Audio CODEC (WM8978)
CMOS camera interface
Connection for the RZ/A2M
Capture engine unit (CEU) and the CMOS camera
connector
SD card interface
Connection for the RZ/A2M SD host interface (SDHI) channel 1 and SD card slot
LAN interface
Connection for the RZ/A2M
Ethernet controller (ETHERC) and LAN connector
via Ethernet PHY
Key input switch
Connection for the RZ/A2M A/D converter (ADC) and push switches
VDC6 interface
Connection for the RZ/A2M
Video display controller 6 (VDC6) and digital image
input/output connector
LVDS interface
Connection for the RZ/A2M LVDS interface and LVDS connector
DRP interface
Connection for the RZ/A2M DRP interface and DRP connector
―
Operation specifications
Refer to Chapter 3 for details on connectors and interfaces