User's Manual
R20UT2886EJ0100 Rev.1.00
Page 4 of 9
Jan 20, 2014
5. Connecting Low voltage OCD board with user system
For connecting Low voltage OCD board with user system, need to mount a connector on user system.
Refer to this chapter and user manual of devices, when you design your system.
5.1
The connector for connecting user system and mounting connector
Figure 4 The connector for mounting user system and mounting connector
(Target MCU: R5F10Y17ASP, R5F10Y16ASP, R5F10Y14ASP)
Figure 5 The connector for mounting user system and mounting connector
(Target MCU: R5F10Y47ASP, R5F10Y46ASP, R5F10Y44ASP)
