QB-V850MINIL, QB-V850MINI Emulator 4. Debugging with In-Circuit method
R20UT0221EJ0400 Rev.4.00
Page 64 of 86
2013.08.30
4.3.4
Switch settings
For the V850MINI self-check board, two types of mode can be selected by setting SW1.
Set SW1 to “Adapter” when performing emulation with the in-circuit method to set the adapter mode.
Table 4-2. SW1 Setting (Self-Check Board)
SW1 Setting
Mode
Description
Adapter
Adapter mode
A setting to set the mode for performing debugging with in-circuit method.
Self Check
Self-check mode
This is the default setting of SW1. A setting to set the mode for performing
self-testing.
This setting is also used to set the mode for writing to the
µ
PD70F3318YGJ
on the V850MINI self-check board using a flash memory programmer.
This mode is used to erase the on-chip flash memory when the debugger
cannot be activated because the user has skipped setting of the security ID
code.
<R>
