QB-V850MINIL, QB-V850MINI Emulator 3. On-Chip Debugging
R20UT0221EJ0400 Rev.4.00
Page 44 of 86
2013.08.30
3.6
Target Connectors for OCD
A target connector for OCD must be mounted on the target system in order to connect QB-V850MINIL or
QB-V850MINI to the target system. The target connector for OCD can be selected from the target connectors listed in
the table below. The features of each target connector are described in the following sections.
Table 3-4. List of Target Connectors for OCD (Part Number and Manufacturer)
Target Connector Name
Part Number
Manufacturer
KEL connector (cannot be used
when using V850E2S or V850E2M)
8830E-026-170S (included with QB-V850MINI)
8830E-026-170L
KEL Corporation
Adapter
QB-V850MINIL-AK1 (included with QB-V850MINI)
Renesas Electronics Corporation
Mictor connector
2-767004-2
Tyco Electronics AMP K.K.
Adapter
QB-V850MINIL-AM1
Renesas Electronics Corporation
SICA connector
SICA2P20S05 (5 set)
Tokyo Eletech Corporation
Adapter
SICA2012P (included with SICA2P20S)
Tokyo Eletech Corporation
2.54 mm pitch 16-pin general-
purpose connector (cannot be used
when using V850E2, V850E1, or
V850ES)
HIF3FC-16PA-2.54DS
HIF3FC-16PA-2.54DSA
Hirose Electronic Co., Ltd.
(for example)
Adapter
QB-V850MINIL-AG1 (inclued with QB-V850MINIL)
Renesas Electronics Corporation
2.54 mm pitch 20-pin general-
purpose connector
HIF3FC-20PA-2.54DS
HIF3FC-20PA-2.54DSA
Hirose Electronic Co., Ltd.
(for example)
Adapter
Not required
−
