Renesas M30800T-CPE, User Manual

Page: 24 / 52

( 24 / 52 )
2.5 Connecting Target System (as occasion demands)
Connect the LCC probe (M30800T-PTC) on the lower board of the emulator to the LCC socket
(option) or the pitch converter board (option).
Figure 2.8 LCC probe on the lower board of the emulator
Some MCU packages need the pitch converter board (option) shown in Figure 2.9. When connecting
it, be sure to check the position of No. 1 pin.
CAUTION
Notes on Connecting Target Systems:
• Take care not to attach the converter board in a wrong direction. It may cause a fatal
damage to the emulator.
• Always shut OFF power of the emulator and the target system when connecting and
disconnecting the target system.
Figure 2.9 Connecting target system
M30800T-PTC
Position of No. 1 pin
(The pin No. and "O" are
marked on the silk.)
: Position of No. 1 pin
*1 : These three products are available in one package.
0.5-mm-pitch
M30800T-CPU bottom connector
100-pin
0.65-mm-pitch
M30800T-PTC
(included)
M30800T-PTC
(included)
M3T-100LCC-DMS
(option)
LCC socket
100-pin LCC
(option)
M3T-DIRECT100S
100-pin QFP
(option)
M3T-DUMMY100S
100-pin QFP
(option)
M3T-FLX-100NRB
100-pin QFP
(option)
M3T-100LCC-QSD
100-pin LQFP
(option)
M3T-FLX-100NSD
100-pin LQFP
(option)
M3T-FLX-144NSD
144-pin LQFP
(option)
*1
144-pin 0.5-mm-pitch
M30800T-PTC
(included)
M30800T-PTC
(included)
M3T-100LCC-DMS
(option)