Renesas M306K9T2-CPE, User Manual

Page: 17 / 56

( 17 / 56 )
(2) Name of Each Part of the Emulator
Figure 2.2 shows the name of each part of the emulator.
Figure 2.2 Name of each part of the emulator (upper side of the M306K9T2-CPE)
(1) System status LEDs
The system status LEDs indicate the emulator main unit's power supply. Table 2.1 lists the
definition of system status LED.
Table 2.1 Definition of system status LEDs
(2) Target status LEDs
The target status LEDs indicate the target MCU's power supply and operating status. Table 2.2
lists the definition of each target status LEDs.
Table 2.2 Definition of target status LEDs
Name
POWER
Number
LED1
Color
Orange
Status
ON
OFF
Function
Power is supplied to the emulator.
Power is not supplied to the emulator.
Emulator system has started normally.
Emulator system has not started normally.
Name
POWER
CLOCK
RESET
RUN
Number
LED3
LED4
LED5
LED6
Color
Orange
Green
Red
Green
Status
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Function
Power is supplied to the target MCU.
Power is not supplied to the target MCU.
BCLK is output from the target MCU.
BCLK is not output from the target MCU.
Target MCU is being reset.
Target MCU is not being reset.
User program is being executed.
User program is not being executed.
SAFE LED2 Green ON
OFF
MADE
SW1
COMPACT EMULATOR
5.0V
IN
T
JP1 E
X
T
3
.3
V JP2
System status LED
LED1: Emulator power (POWER)
LED2: Emulator startup (SAFE)
Target status LED
LED3: Target system power (POWER)
LED4: Clock oscillation (CLOCK)
LED5: MCU RESET pin (RESET)
LED6: Program execution (RUN)
JP1: Jumper for selecting MCU power source
(Factory-setting: INT)
System reset switch
J2: Connector (USB cable)
J1: Connector (Power)
POWER
LED1
SAFE LED2
POWER
CLOCK
RESET
RUN
LED3
LED6
LED5
LED4