manualshive.com logo in svg

Renesas M16C/6NK, Hardware Manual

The Renesas M16C/6NK is a high-performance microcontroller designed for embedded applications. For detailed instructions on how to utilize its features and capabilities, you can download the Hardware Manual for free from our website. Ensure optimal performance by referencing the manual before integrating this powerful device into your projects.

Share
Download
background image

A-1

Table of Contents

SFR Page Reference ............................................................................................................ B-1

1. Overview ............................................................................................................................... 1

1.1 Applications .................................................................................................................................................. 1

1.2 Performance Outline .................................................................................................................................... 2

1.3 Block Diagram .............................................................................................................................................. 4

1.4 Product List .................................................................................................................................................. 5

1.5 Pin Configuration ......................................................................................................................................... 6

1.6 Pin Description ........................................................................................................................................... 13

2. Central Processing Unit (CPU) ........................................................................................... 16

2.1 Data Registers (R0, R1, R2, and R3) ........................................................................................................ 16

2.2 Address Registers (A0 and A1) .................................................................................................................. 16

2.3 Frame Base Register (FB) ......................................................................................................................... 17

2.4 Interrupt Table Register (INTB) .................................................................................................................. 17

2.5 Program Counter (PC) ............................................................................................................................... 17

2.6 User Stack Pointer (USP), Interrupt Stack Pointer (ISP) ........................................................................... 17

2.7 Static Base Register (SB) .......................................................................................................................... 17

2.8 Flag Register (FLG) ................................................................................................................................... 17

2.8.1 Carry Flag (C Flag) ............................................................................................................................ 17

2.8.2 Debug Flag (D Flag) .......................................................................................................................... 17

2.8.3 Zero Flag (Z Flag) .............................................................................................................................. 17

2.8.4 Sign Flag (S Flag) .............................................................................................................................. 17

2.8.5 Register Bank Select Flag (B Flag) .................................................................................................... 17

2.8.6 Overflow Flag (O Flag) ....................................................................................................................... 17

2.8.7 Interrupt Enable Flag (I Flag) ............................................................................................................. 17

2.8.8 Stack Pointer Select Flag (U Flag) ..................................................................................................... 17

2.8.9 Processor Interrupt Priority Level (IPL) .............................................................................................. 17

2.8.10 Reserved Area ................................................................................................................................. 17

3. Memory ............................................................................................................................... 18

4. Special Function Register (SFR) ......................................................................................... 19

5. Reset ................................................................................................................................... 35

5.1 Hardware Reset ......................................................................................................................................... 35

5.1.1 Reset on a Stable Supply Voltage ..................................................................................................... 35

5.1.2 Power-on Reset ................................................................................................................................. 35

5.2 Software Reset .......................................................................................................................................... 37

5.3 Watchdog Timer Reset ............................................................................................................................... 37

5.4 Oscillation Stop Detection Reset ............................................................................................................... 37

5.5 Internal Space ............................................................................................................................................ 37

6. Processor Mode .................................................................................................................. 38

6.1 Types of Processor Mode .......................................................................................................................... 38

6.2 Setting Processor Modes ........................................................................................................................... 39

7. Bus ...................................................................................................................................... 45

7.1 Bus Mode ................................................................................................................................................... 45

7.1.1 Separate Bus ..................................................................................................................................... 45

7.1.2 Multiplexed Bus .................................................................................................................................. 45

Summary of Contents for M16C/6NK





















































































































































































































































































































































































































Reviews:

No comments

Related manuals for M16C/6NK

Omnia Volt Quick Start Installation Manual preview
Volt
Brand: Omnia Pages: 6
Alacritech 1000x1 Hardware Installation Manual preview
1000x1
Brand: Alacritech Pages: 20
LSI MegaRAID SCSI 320-2X Quick Installation Manual preview
MegaRAID SCSI 320-2X
Brand: LSI Pages: 4
IEI Technology PUZZLE-IN003B User Manual preview
PUZZLE-IN003B
Brand: IEI Technology Pages: 86
Dahua Technology Lite N42B1P Series Quick Start Manual preview
Lite N42B1P Series
Brand: Dahua Technology Pages: 14
National Instruments NI WLS/ENET-9163 User Manual preview
NI WLS/ENET-9163
Brand: National Instruments Pages: 36
Grizzly PSJ-M3 GEN2 User Manual preview
PSJ-M3 GEN2
Brand: Grizzly Pages: 9
ZALMAN CNPS7000A Series User Manual preview
CNPS7000A Series
Brand: ZALMAN Pages: 9
CAME 848EA-0120 Setup And User'S Manual preview
848EA-0120
Brand: CAME Pages: 32
Noraxon TeleMyo 2400T V2 User Manual preview
TeleMyo 2400T V2
Brand: Noraxon Pages: 52
ALIBI ALI-NVR71128R User Manual preview
ALI-NVR71128R
Brand: ALIBI Pages: 232
Commell MP-6802 User Manual preview
MP-6802
Brand: Commell Pages: 18
IEI Technology TANK-101B User Manual preview
TANK-101B
Brand: IEI Technology Pages: 116
PairGain 150-1504-15 Manual preview
150-1504-15
Brand: PairGain Pages: 68
INFRALAN SECURITY ILR-16POE Quick Manual preview
ILR-16POE
Brand: INFRALAN SECURITY Pages: 15
Crestron UC-CAM-UPGRD-300 Quick Start preview
UC-CAM-UPGRD-300
Brand: Crestron Pages: 2
Crestron CNXLIR Operation Manual preview
CNXLIR
Brand: Crestron Pages: 16
MikroTik nRAYG-60adpair Manual preview
nRAYG-60adpair
Brand: MikroTik Pages: 7

Brands by name

Popular brands

Load more brands