Section 2 Connection Procedures
Rev. 2.00 Sep. 08, 2008 Page 10 of 20
REJ10J1394-0200
2.4
Recommended Dimensions for the User System Mounting Pad
(Footprint)
Figure 6 shows the recommended dimensions for the mounting pad (footprint) for the user system
with the IC socket for an PLQP0120LA-A package (NQPACK120SE-ND: manufactured by
Tokyo Eletech Corporation). The dimensions in figure 6 are somewhat different from those of the
mounting pad for the system with the actual MCU. Also, note the user system can not be
connected to the user system interface board with inserting the guide pins in place.
Unit: mm
0.40
±
0.05
0.40 x 29 = 11.6
±
0.05
0.40 x 29 = 11.6
±
0.05
0.2
±
0.05
3.0 -
φ
1.0
5.8
5.8
0.40
±
0.05
13.0 MAX
17.0 min
Figure 6 Recommended Dimensions for the Mounting Pad
Summary of Contents for H8SX/1651
