H8S, H8SX Family E10A-USB Emulator
Section 2 Specifications of the Emulator’s Software
R20UT0271EJ0100 Rev. 1.00
Page 11 of 20
May 13, 2011
12. Value Set in the [System Clock] Dialog Box when Connecting the Emulator
Input the frequency of the oscillator in use in the [System Clock] dialog box (this also applies
when the MCU is multiplied by the PLL circuit).
Figure 2.1 [System Clock] Dialog Box
13. Emulation on Programming or Erasing the Internal Flash Memory
A break cannot be generated while the program for programming or erasing the internal flash
memory is being called. Note that the following processing also cannot be performed:
•
Execution of the [STOP] button
•
Auto-update of the watch function and use of the tool-chip watch function
•
Memory operation during executing emulation
14.
Table 2.2 shows a list of devices supported by the H8S/2427, H8S/2427R, and H8S/2425
group emulator.
Table 2.2 A List of Devices Supported by the Emulator
Register Initial
Value
H8S/2427 E10A-USB SYSTEM (CPU2600)
H8S/24279, H8S/24279R, H8S/24278, H8S/24278R,
H8S/24276, H8S/24276R, H8S/24275, H8S/24275R
H8S/2425 E10A-USB SYSTEM (CPU2600)
H8S/24259, H8S/24258, H8S/24256, H8S/24255
