Renesas Emulator System E8, User Manual

Page: 25 / 166

Section 2 E8 Emulator Functions
This section describes the emulator functions. They differ according to the device supported by the
emulator.
2.1 Overview
Table 2.1 gives a functional overview of the emulator.
Table 2.1 Emulator Functions
No. Item Function
1 User program execution
function
•
Executes a program with the operating frequency within a
range guaranteed by devices.
•
Reset emulation
•
Step functions:
Single step (one step: one instruction)
Source-level step (one step: one source)
Step over (a break did not occur in a subroutine)
Step out (when the PC points to a location within a
subroutine, execution continues until it returns to the calling
function)
2 Reset function
•
Issues a reset from the High-performance Embedded
Workshop to the device during break.
3 Trace function
•
Branch trace function incorporated in the device (four
branches)
The support of this function depends on a device.
4 Break functions
•
Hardware break condition (one condition)
The support of this function depends on a device.
•
PC break condition (255 points)
•
Forced break function
•
Address match break function
7