Renesas Emulator System E8, User Manual

Page: 140 / 166

•
The [Break condition 1] dialog box is displayed.
•
Clear the [Don't care] check box in the [Address] group box.
•
Select the [Only program fetched address after] radio button and enter
H'0E1F2
as the value
in the [Address] edit box.
Figure 6.35 [condition] Page ([Break condition 1] Dialog Box)
Click the [OK] button.
The first point display in the State line changes from
Disable
to
Enable
.
The first point display in the Condition line changes from
None
to
Address =
H’0000e1f2(Tutorial.c/41)pcbefore
.
Set the program counter value (PC = H’0E6C6) that was set in section 6.8, Setting Registers, in
the [Register] window. Click the [Go] button.
Note: The items that can be set in this page differ depending on the product. For the settings for
each product, refer to the online help.
122