Renesas Emulation Pod for M30240 Group MCUs M30240T-RPD-E, User Manual

Page: 26 / 60

( 24 / 58 )
Table 3.1 Switch settings of M30240T-RPD-E
Signal Switch Setting Description
Connects the LPF pin to the LPF circuit in the pod.
JP1
TLPF BLPF
JP1
TLPF BLPF
(Factory-setting)
JP2
BXCAP TXCAP
(Factory-setting)
JP2
BXCAP TXCAP
JP3
BYPASS FILTER
(Factory-setting)
JP3
BYPASS FILTER
JP4
FILTER BYPASS
JP4
FILTER BYPASS
(Factory-setting)
LPF JP1
XCAP JP2
D+ JP3
D- JP4
Connects the LPF pin to the target system.
Connects the XCAP pin to the XCAP circuit in the
pod.
Connects the XCAP pin to the target system.
Connects the D+ pin directly to the target system.
Connects the D+ pin to the target system via the
FILTER circuit in the pod.
Connects the D- pin directly to the target system.
Connects the D- pin to the target system via the
FILTER circuit in the pod.
* For the connection diagram of the peripheral circuit of the emulation pod M30240T-RPD-E, refer
to "5.2 Connection Diagram" (page 43).
CAUTION
Note on Changing the Setting of Switches:
• Set the JP3 and JP4 to the same direction (FILTER side or BYPASS side).