CPX4 AC-PLC Evaluation Kit M02D2 RTK0EE0009D02001BJ
3
．
Interface Specifications
R30UZ0165EJ0100 Rev.1.00
Page 38 of 53
July 01, 2021
3.3
Filter Board
This section describes the interface specifications and JP sets of the Filter board for RX-BPF.
3.3.1 Explanation of Connectors and JP of Filter Board
Figure 3-4 is the placement of connectors and JP, and the applications are shown in Table 3-20.
Figure 3-4 Connectors and JP for Filter Board
Table 3-20 Usages of Connectors and JP for Filter Board
Connector, JP name
Use
JP201
Selects whether to insert a low-pass noise suppressing filter (20kHz or less) on F2-type filter
board.
Short if used. Open if not used (factory default)
CN201
AC-PLC board-connection connector for A2-type Filter board
CN202
AC-PLC board-connection connector for F2-type Filter board
CN203
AC-PLC board-connection connector for G2-type Filter board
