2010 Release
E-54
4.6
WHEELS AND TYRES
4.6.1
CHARACTERISTICS
Wheels
Material: Aluminum/magnesium alloy.
A B C D E
Wheel type
Width
(inches)
Wheel rim
profile
Nominal
under tyre
bead
(inches)
Number of
holes
ET offset
8J×17 8
J
17
5
68
Maximum offset: 0.3mm measured on the wheel rim.
Maximum out-of-round: 0.3mm measured on the tyre bead bearing surface.
When balancing the fitted wheels, it is essential to avoid placing the balancing
weights in an area where they could come into contact with the EE’ support in
steering lock position.
Tyres
The tyres are made by Michelin.
Dry Wet
Front S9C
P2E
Type
Rear S9C P2E
Front 20/61-17
20/61-17
Dimensions
Rear 20/61-17
20/61-17
Front 1.6* 1.7*
Cold inflation
pressure (bar)
Rear 1.7* 1.8*
*The cold pressure values are given for information and should be adjusted according to
track conditions (temperature, roughness, grip, amount of water, etc.).
Notes:
To ensure predictable and reproducible pressure increase, we strongly
recommend the use of a water vapor-free inflation gas (dry air, nitrogen, etc.).
To ensure a good valve seal, the cap should always be used.
The wheels are identified by the two engravings on the inside, corresponding to
their widths (see photos). Only the engraving with a cross (1) on the right
should be taken into account.
4.7
1
Summary of Contents for Clio Cup
Page 1: ...USER MANUAL E Chassis...