Renault Clio Cup, User Manual, Page: 27 / 69

2010 Release
E-27
-
Disassembly & reassembly
The disassembly & reassembly of the
damper system is performed in the same
manner as for the front axle (see 4-3
Front axle/Front load bearing
components/Support strut).
Rear axle
-
Removal
Operations Photos
1 - Place the vehicle on an auto-lift.
2 -
Remove the lower attachment (1) of the two
shock absorbers.
3 - Remove the brake hoses from the calipers.
4 -
Support the rear axle and then remove:

The six bearing mounting bolts (2) .

The rear axle.
-
Refitting
Perform the removal steps in reverse order.
Tightening torques:

Lower shock absorber mounting bolt: 105Nm .

Bearing mounting bolt on body: 62Nm .

Brake hose on caliper: 14Nm .
Drain the braking circuit.
1
2