FUEL MIXTURE
Inlet manifold
12
12-8
Inlet manifold
REMOVAL
The removal of the inlet manifold/cylinder head cover
requires the removal of the injectors and injection
harnesses. (See section 13
"Removing/refitting the
high pressure injection section"
).
Insert the mounting tool
Mot. 1390
under the engine
and transmission assembly, positioning the right-hand
pads only beneath the engine. Lower the two unused
left-hand pads.
Remove the right-hand suspended engine mounting
cover.
Undo the two clips on the connection hose (1)
between the inlet manifold and the damper unit.
Remove the pad (2).
SPECIAL TOOLING REQUIRED
Mot. 1390
Engine and transmission
assembly mounting tool
TIGHTENING TORQUES (in daN.m)
Heater plugs
1.1
Manifold mounting stud
1
"Common-Rail" high pressure unions
2.5
15855M2
