8
R
888 Porter Rd. Muskegon, MI 49441 Phone: 231.798.8888 Fax: 231.798.4960 www.structuralconcepts.com
ELECTRICAL FUNDAMENTALS
Warning, disconnect power before providing
maintenance and service to unit.
Ballast Access/Removal
•
Assembly or disassembly and servicing
to be accomplished by licensed electrical
contractor.
•
Remove the rear grill by removing the six
screws located on both sides of the grill.
•
Remove the control panel by removing the
three remaining screws located on the right
side of the panel.
•
Release quick disconnect from wire har-
ness.
•
Remove two nuts from both end mounting
flanges.
Electrical Box Access/Removal
•
Assembly or disassembly and servicing
to be accomplished by licensed electrical
contractor.
•
Remove the rear grill by removing the six
screws located on both sides of the grill.
•
Remove the control panel by removing the
three remaining screws located on the right
side of the panel.
•
Remove the electrical box by removing the
four screws located inside and at the top of
the box.
Evaporator Pan Access/Removal
•
Assembly or disassembly and servicing
to be accomplished by licensed electrical
contractor.
•
Turn off main power and allow evaporator
pan to cool.
•
Remove the rear grill by removing the six
screws located on both sides of the grill.
•
Check temperature of pan prior to han-
dling.
•
Withdraw evaporator pan from the right side
behind electrical box.
•
Disconnect evaporator pan power cord from
receptacle at the pan.
•
Empty evaporator pan contents into a suit-
able container.
Rear Grill
Elect. Box Screws
Ballast
Control Panel
Evaporator Pan
