3
2611.01.0514 CAL
QUICK REFERENCE GUIDE
CONFIRM SELECTION
HOW TO SELECT THE RIGHT OPTION BASED ON WATER FLOW
To measure the water flow, place a container of known volume under the customer’s existing faucet, turn the water
on all the way and count the number of seconds needed to draw one liter (¼ gal. approx.) of water, find the number
of seconds in the graph below. If the result shows reduced or insufficient flow, you may need to change the selected
model to one that shows “OK”.
CUSTOMER ADVICE FOR INSTALLATION:
Model UCU
• Always install with two people
• Lift out old faucet and measure faucet hole BEFORE disconnecting
• Ensure faucet body is front-aligned and that the light collar and faucet are held stationary while tightening
from below. The parts should not move independently to avoid cutting the data cable and disabling the
indicator lights
• Bracket may be ordered for mounting on a wall or under sink (sold separately)
Both models
• Have 2 fresh high quality AA batteries available for initial installation (batteries not included)
• Always “charge” the cartridges with water during installation to avoid “run-on”
• See Use & Care Manual for all recommended tools and details (also on www.renaware.com)
1 2 3 4 5
6 7 8 9 10
11 12 13 14
15
16 17 18 19
20
21+
COUNTER-TOP UNIT
(CTU-200 CAL)
OK
OK
OK
REDUCED
FLOW
INSUFFICIENT
FLOW
UNDER-THE-COUNTER UNIT
(UCU-200 CAL)
OK
REDUCED
FLOW
INSUFFICIENT
FLOW
INSUFFICIENT
FLOW
INSUFFICIENT
FLOW
Note: The Aqua
3
Nano may not be appropiate for customers known to have less than 30 psi in water pressure..
NUMBER OF SECONDS TO FILL ONE LITER (1/4 Gallon)
AQUA
3
NANO MODEL SELECTOR
