Target value cooling mode
Programming target values
The target value cooling (r 01) and the actual (hysteresis) cooling (r 02)
can be displayed and changed under the menu item “-r-” without the
use of a password.
With the Key-Pad
▲
or
▼
the value can be changed within limits.
r 01 = 12.0 °C
Target value cooling mode (
factory setting
)
r 02 = 2.0 °C
Hysteresis cooling mode (
factory setting
)
Minimum target value cooling mode
10.0 °C
Maximum target value cooling mode
28.0 °C
Target value heating mode
The target value heating (r 03) and the hysteresis heating (r 04) can be
displayed and changed under the menu item “-r-” without the use of
a password.
With the Key-Pad
▲
or
▼
the value can be changed within the limits set
in the factor (r15 + r16).
r 03 = 40.0 °C
Target value heating mode (
factory setting
)
r 04 = 2.0 °C
Hysteresis heating mode (
factory setting
)
Minimum target value heating mode
30.0 °C
Maximum target value heating mode
45.0 °C
Password
Password
Display
Display
Submenu
Submenu
Submenu
Submenu
short-term
short-term
min. 5 sec.
+
...
repeated
short-term
short-term
short-term
short-term
Target value cooling
Target value cooling
old target value
old target value
new target value
new target value
short-term
short-term
min. 5 sec.
+
...
...
repeated
short-term
short-term
short-term
short-term
REMKO RVS...H (INOX)
10
Summary of Contents for RVS 100H INOX
Page 2: ......
