11
Care and mainte-
nance
Regular care and maintenance guarantee trouble-
free operation and a long service life of the heat
pump.
n
Check the electrical wiring
n
Empty the storage tank for a heat pump shut-
down. Risk of freezing!
n
We recommend cleaning the storage tank reg-
ularly
n
Check the function of sacrificial anode regularly
n
We recommend setting the hot water tempera-
ture as low as possible, in order to ensure the
most effective operation possible
n
Check all parts for pressure resistance and
leak-tightness. Check the refrigerant volume
regularly
n
To perform the statutory seal test where appli-
cable, it is necessary to arrange an annual
maintenance contract with an appropriate spe-
cialist firm.
n
In the air intake of a basement laundry drying,
filters should be provided and should be moni-
tored monthly. Also note the maximum pres-
sure loss.
12
Temporary shutdown
The system may not be switched off at the mains
power supply even if the heating system is not
used for heating purposes over an extended period
(e.g. holidays)!
n
The system is to be switched to "Stand-by"
mode during temporary shutdowns.
n
Heating phases can be programmed for the
duration of the period of absence.
n
The previous operating mode has to be
switched back on when the shutdown phase is
over.
n
Changing the operating mode is described in
the "Operation" chapter.
NOTICE!
In "Standby" , the heat pump is in standby
mode. Of the entire system, only the frost-pro-
tection function s activated.
REMKO RBW
36
Summary of Contents for RBW 300 PV
Page 9: ...Lid dimensions 620 mm 460 mm 300 mm 150 mm 150 mm 160 mm 400 mm Fig 2 Lid dimensions 9...
Page 45: ...45...
Page 46: ...REMKO RBW 46...
Page 47: ......