REMKO RAV 35, Operating Instructions Manual

Page: 9 / 16

4 Electrical wiring
n The 230V electrical connection is made using a
built-in mains cable with earthed safety plug.
n Connect the power plug to a properly installed
and appropriately safeguarded mains socket.
n All cable extensions must only be used in fully
un-reeled or reeled off condition.
WARNING!
The electrical connection for the units must be
made at a separate feed point with a residual
current device in accordance with VDE 0100,
Section 55.
5 Commissioning
Before the initial commissioning
n Check that the unit and any accessories being
used are installed correctly.
A
B
A: Example 1 - Optional dust bag # 1009540
B: Example 2 - Optional WL hose # 1009512
NOTICE!
Always fasten hoses and dust bag with suitable
lashing straps or clamps.
Commissioning
Connect unit
n Switch unit to desired power stage using the 2-
stage operating switch.
Reset
MS
n If required, read off and record the operating
hours on the operating hours counter.
9