Extended functionality of the remote control
2
1
4
3
5
7
9
12
14
6
8
10
11
13
21
15
16
Fig. 10: Keys on the remote control
1
"ON/OFF" key
This key switches the unit on and off. This also
deactivates recently used functions such as the
timer or the "Sleep" mode.
2
"MODE" key
This key is used to select a mode. Press this key to
change between the following operating modes:
1. Automatic mode (AUTO)
2. Cooling mode (COOL)
3. Dehumidification mode (DRY)
4. Heating mode (HEAT)
5. Recirculation mode (FAN)
3
"SPEED" key
Press this key to select the fan speed. The fol-
lowing stages are available:
Automatic (Auto), low (Low), medium (Mid) and
high (High) fan stage.
4
" ▲ " and " ▼ " keys
The " ▲ " key increases the desired temperature to
32 °C in 0.5°C increments.
The " ▼ " key decreases the desired temperature
to 16 °C in 0.5°C increments.
5
"TURBO" key
Press this key in cooling and heating mode to acti-
vate and deactivate the "TURBO" function. The
configured setpoints can be reached more quickly
by using this function.
6
"HEALTH" key
When you activate the "HEALTH" function, the unit
selects the fan speed and air outlet temperature
that is ideal for the user’s well-being based on the
current room temperature.
7
"SILENCE" key
"SILENCE" mode is activated/deactivated by
pressing this key. By lowering the fan speed to a
minimum, the noise emissions are reduced signifi-
cantly.
8
"SLEEP" key
When you press the "SLEEP" key, the corre-
sponding symbol appears on the display of the
indoor unit and the "SLEEP" function is activated
for 10 seconds. When you activate this mode, the
room temperature is adjusted automatically within
10 seconds to ensure the optimum sleeping tem-
perature.
9
"TIMER" key
The start/stop timer can be programmed with this
key. A flashing "H on/(off)" appears on the display
when you press the key once. If you would like to
program the start time, select "H on", for the stop
time, select "H off". You can now use the arrow
keys to preselect the time in increments of 0.5
hours at which the unit should switch on/off. Press
the key again to confirm. "H on/(off)" stops
flashing. The start or stop time has now been pre-
selected. If you do not press a key while "H on/
(off)" is flashing, the remote control will reset auto-
matically after 10 seconds. To deactivate the timer,
you must press the "Timer" key again.
REMKO JBW...DC
14
Summary of Contents for JBW 260 DC AT
Page 50: ...REMKO JBW DC 50...
Page 51: ......
