![background image](http://html1.mh-extra.com/html/remington/wr5100/wr5100_user-manual_1437709012.webp)
Questions or comments:
Call 800-736-4648 in the US
or 800-268-0425 in Canada. Or visit
RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada, Inc.,
131 Saramia Crescent, Vaughan, ON L4K 4P7
® Registered Trademark and TM Trademark
of Spectrum Brands, Inc.
© 2015 Spectrum Brands, Inc. 1/15 11631-00
Made in China
T22-0003184
■
Always hold the shaver at a right angle to the skin so that all three heads are
touching the skin with equal pressure.
■
Stretch skin with the free hand so hairs stand upright, making it easier for them
to enter the cutting chamber.
■
Use moderate to slow, circular stroking movement.
■
The use of short, circular motions in stubborn areas may obtain a closer shave.
■
Do not press hard against the skin to avoid skin irritation and/or damage to the
rotary heads.
Shaving Tips (Dry)
The shaver is a wet/dry appliance. The shaver may be
cleaned under warm water.
Cleaning & Care
When your rechargeable shaver reaches the end of its useful life, the LiFePO4
batteries must be removed from the shaver and be recycled or disposed of prop-
erly in accordance with your state and local requirements. If this is not required
by law, you may elect to dispose of the shaver with the batteries.
CAUTION!
Do not put in fire or mutilate your batteries when disposing as they
may burst and release toxic materials. Do not short circuit as it may cause burns.
Dispose of properly in accordance with your local and state requirements.
To Remove the Rechargeable Battery:
1.
Unplug the shaver
2.
Run shaver until the motor stops
3.
Remove the head from the shaver (Pull head up and off)
4.
Using a small screwdriver, pry the ‘collar’ off of the top of the handle
5.
Using a small screwdriver, pry the front cover from the body
6.
Remove three screws located on front of shaver
7.
Using a small screw driver, pry up the newly unsecured inner housing to expose
the battery
8.
Pry battery free from circuit board
9.
Dispose of battery properly
Battery Removal
NOTE:
When cleaning your shaver, make sure the shaver is turned off
and disconnected from the power cord.
CAUTION!
■
To clean the external surfaces of the shaver, use a damp cloth. Do not use
strong detergents or other chemicals.
■
To dry, wipe the surface of the shaver with a dry towel. Do not use a hair dryer
or heater to dry the shaver.
Weekly Care:
1.
Perform the daily cleaning steps 1 and 2.
2.
Remove the cover from the hair pocket assembly. (Diagram L).
3.
Release the inner cutter lock by sliding out of support. (Diagram M)
4.
Remove the inner cutter carrier away from the cutters. (Diagram M)
5.
Remove the cutters. (Diagram N)
6.
Thoroughly rinse away any debris from inner and outer cutters. (Diagram O)
7.
Replace the inner cutters by matching the color of the inner cutters to the
corresponding outer cutter hub. (Diagram P)
8.
Place inner cutter lock back into position by sliding it back into the support until it
snaps into place. (Diagram Q)
9.
Lubricate each cutter with household oil.
10
. Snap head assembly back onto neck/hair pocket.
Trimmer:
Lubricate teeth with oil every six months
I
K
J
L
M
N
O
P
Q
By registering your new Remington
®
product you will receive these important benefits:
■
Proof of ownership
■
Product protection
■
Product registration
■
Special offers
Register online at: RemingtonProducts.com
Product Registration
How To Order Shaver Accessories
It is very important to replace your head and cutters when necessary to ensure
a close, comfortable shave without irritation. We recommend they be replaced
every 12 months. Here are some signs of head and cutter wear, indicating that
replacement is needed:
■
Irritation:
As the heads get excessively worn you may experience some skin
irritation. This would be especially noticeable when you apply moisturizing lotion.
■
Pulling:
When the cutters wear you may feel a sense of pulling and a loss of
closeness when you shave. This is an indication that it is time to replace your
heads and cutters.
Maintain your shaver’s peak performance!
Keep Your Shaver Performing Like New!
■
Because your satisfaction is important to us, we want to make it simple for you
to keep your new shaver performing at its peak.
■
Did you know that for the best possible shave, it is necessary to replace the
heads and cutters on your shaver every 12 months?
■
Remington makes this easy!
Two Easy Ways to Order!
1.
Call! U.S. Residents call 1-800-392-6544
Canadian Residents call 1-800-268-0425
2.
Order Online at
RemingtonProducts.com
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of consumer
purchase. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to:
Remington Returns Center, 507
Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more information call 800-736-
4648 in the US or 800-268-0425 in Canada.
Warranty excludes:
■
Heads and cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
■
Accident, misuse, abuse or alteration of the product
■
Servicing by unauthorized persons
■
Use with unauthorized accessories
■
Connecting it to incorrect current and voltage
■
Wrapping cord around appliance causing premature wear & breakage
■
Any other conditions beyond our control
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow the
exclusion or limitation of incidental, special or consequential damages.
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington
®
branded product,
you are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada.
Warranty
Performance Guarantee
Remington Guarantees Satisfaction After 30 Days!
Remington
®
60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded product, you are
not completely satisfied and would like a refund, return it with the original dated
sales receipt directly to Remington and receive a full refund.** For questions
concerning the money-back guarantee, please call 800-736-4648 in the US or
800-268-0425 in Canada.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington branded product:
a. The Remington
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with
the product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or
damaged product.
7. Please allow 4-6 weeks to receive your refund by check.
Contains a Listed Adaptor
Daily Care:
1.
Pull rotary head face of shaver off of lower hairpocket. (Diagrams I and J)
2.
Tap out excess hair shavings. (Diagram K)
3.
Rinse the head of the shaver in running water.
4.
Close head assembly.
Shaving Tips With Gel or Foam (In Shower or Over the Sink)
We recommend that you use the shaver in the shower for optimal performance.
NOTE:
In order to ensure optimal performance, thoroughly rinse the shaver
head under water during and after shaving.
1.
Apply water to desired shaving area.
2.
Apply shaving cream to desired shaving area.
3.
Rinse shaver head under water.
4.
Shave using short, circular strokes.
5.
Throughout the shave, regularly rinse shaver head under water to avoid residue
build up.
6.
When finished shaving, rinse shaved area.
7.
Thoroughly rinse shaver head of all gel or foam.
8.
Follow cleaning and care instructions.