7
CLEANING & MAINTENANCE
CARE FOR YOUR SHAVER
To ensure long lasting performance of your shaver, clean the head assembly
regularly. The easiest and the most hygienic way to clean the shaver is by
rinsing the shaving head after use with warm water. Always keep the protective
headguard on the shaving head when the shaver is not in use.
AFTER EACH USE
1. Ensure the shaver is turned off.
2. Press the release buttons to open the shaver head.
3. Blow on the foils to remove any loose debris.
4. Brush or rinse the accumulated hair from the main body of the shaver,
shaving head and cutter assembly.
5. Leave the head assembly open to let the shaver dry completely.
6. Return the shaving head to its original position and snap in place.
NOTE:
• Ensure that the shaver is turned off when cleaning.
• Do not clean the shaving foils with the brush.
• At regular intervals, put a drop of sewing machine oil onto the foils and
cutters heads.
REPLACING THE FOILS & CUTTERS
Signs that your foils and cutters need replacing:
Irritation:
As foils get worn, you may experience skin irritation.
Pulling:
As the cutters wear, your shave may not feel as close and you may
feel your cutter pulling on your hair.
Wear:
You may notice that the cutters have worn through the foils.
To ensure the continued highest quality performance from your shaver, we
recommend that foils and cutters are replaced every 6 months.
TO REPLACE THE FOIL
1. Ensure the shaver is switched off.
2. Remove the shaver head.
3. Gently push the small plastic tabs area at either end of the foil carrier. The
foil carrier should then easily detach from the shaving head.
4. To reassemble, snap the new foil carrier into position.
5. Attach the shaving head.
