When your rechargeable shaver reaches the end of its useful life, the LiFePO4
batteries must be removed from the shaver and be recycled or disposed of prop-
erly in accordance with your state and local requirements. If this is not required
by law, you may elect to dispose of the shaver with the batteries.
CAUTION!
Do not put in fire or mutilate your batteries when disposing as they
may burst and release toxic materials. Do not short circuit as it may cause burns.
Dispose of properly in accordance with your local and state requirements.
To Remove the Rechargeable Battery:
1. Unplug the shaver
2. Run shaver until the motor stops
3. Remove the head from the shaver. (Pull head up and off.)
4. Remove the screw that is exposed when the head is removed.
5. Using a small screwdriver, pry the front cover from the body.
6. Using a small screwdriver, pry both side covers from the body.
7. Remove four screws located on the front of shaver along the outside edge.
8. Using a small screw driver, pry up the newly unsecured front inner housing.
9. Remove 3 screws that were newly exposed on front.
10. Using a small screw driver, pry up the newly unsecured inner back housing to
expose the battery.
11. Pry battery free from circuit board.
12. Dispose of battery properly.
Product Disposal
Questions or comments:
Call 800-736-4648 in the US or 800-268-0425 in
Canada. Or visit
RemingtonProducts.com
Dist. by: Spectrum Brands, Inc., Middleton, WI 53562
Dist. by: Spectrum Brands Canada, Inc.,
131 Saramia Crescent, Vaughan, ON L4K 4P7
® Registered Trademark and TM Trademark
of Spectrum Brands, Inc.
© 2016 Spectrum Brands, Inc. 12/15 14048-00
Made in China
T22-0003991-A
By registering your new Remington
®
product you will receive these important benefits:
• Proof of ownership
• Product protection
• Product registration
• Special offers
Register online at: RemingtonProducts.com
Product Registration
Replacement Parts
Rotary Shaving Heads
To keep your shaver working at peak performance, it is recommended that you
replace the cutting head after every 12-18 months of use. Indication that your
shaver may need to have the cutting head replaced would be if you notice an
increase in irritation of your skin after you shave or you feel hair pulling due to dull
cutting blades.
The replacement cutting head for your shaver is: SPR-XR
Groomer attachment with adjustable length settings:
SPR-XT
Replacement Brushes
It is recommended that you replace your brush heads every 3 months.
SPR-XFB - Pre-Shave Brush with Brush Mount
SPR-XFM - Pre-Shave Brush
SPR-XFN - Deep Cleaning Brush
SPR-XFD - Daily Cleaning Brush
How to Order Parts and Accessories
Two easy ways to order spare parts and accessories are available.
• Order by Phone: U.S. Residents: 1-800-392-6544
• Order Online: RemingtonProducts.com
Limited Two-Year Warranty
Spectrum Brands, Inc. warrants this product against any defects that are due to faulty
material or workmanship for a two-year period from the original date of consumer
purchase. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty
period, we will replace it free of charge. Return your product and sales receipt with
your name, address and day time phone number to:
Remington Returns Center,
507 Stokely Dr., P.O. Box 1, Deforest, WI 53532. For more information call
800-736-4648 in the US or 800-268-0425 in Canada.
Warranty excludes:
• Heads and cutters
KEEP ORIGINAL SALES RECEIPT AS PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products damaged by the following:
• Accident, misuse, abuse or alteration of the product
• Servicing by unauthorized persons
• Use with unauthorized accessories
• Connecting it to incorrect current and voltage
• Wrapping cord around appliance causing premature wear & breakage
• Any other conditions beyond our control
SPECTRUM BRANDS, INC. SHALL NOT BE RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IM PLIED
WARRANTIES OF FITNESS AND MERCHANTABILITY, ARE LIMITED IN DURATION TO
TWO YEARS FROM DATE OF ORIGINAL PURCHASE.
This warranty gives you specific legal rights and you may also have other rights
which vary from state to state or province to province. Some states do not allow
the exclusion or limitation of incidental, special or consequential damages.
Warranty
Performance Guarantee
Spectrum Brands, Inc. Money-back Offer
If within 30 days after you have purchased your Remington® branded product,
you are not satisfied and would like a refund, return it with the sales slip indicating
purchase price and date of purchase to the retailer from whom it was purchased.
Spectrum Brands, Inc. will reimburse all retailers who accept the product within 30
days from the date of purchase. If you have any questions concerning the money-
back guarantee, please call 800-736-4648 in the US or 800-268-0425 in Canada.
Remington Guarantees Satisfaction After 30 Days!
Remington Men’s Shave and Groom 60-Day Money Back Guarantee*
If within 60 days after purchasing any Remington
®
branded Men’s Shave and
Groom product, you are not completely satisfied and would like a refund, return
it with the original dated sales receipt directly to Remington and receive a full
refund.** For questions concerning the money-back guarantee, please call
800-736-4648 in the US or 800-268-0425 in Canada.
*Applies to US and Canadian customers’ returns only.
**Terms and conditions apply.
Terms and Conditions
1. Refund will be in the form of a check issued in US Dollars and will be provided
only if all Terms and Conditions are met.
2. The following items must be returned to Remington and postmarked no later
than 60 days after purchase of the Remington
®
branded Men’s Shave and
Groom product:
a. The Remington
®
product;
b. The original sales receipt indicating price and date purchased; and
c. The completed 60-day money back guarantee form located at
RemingtonProducts.com/60day.
3. In addition, Remington, in its discretion, must determine that the returned
product was used in accordance with the instruction booklet (included with the
product at the time of purchase).
4. Returns should be mailed prepaid (no collect returns accepted) to:
Remington 60-Day MBG
507 Stokely Drive, Box 1
DeForest, WI 53532
5. Refund does not include postage costs for the return of the product, but will
include applicable taxes paid by customer, if any.
6. No responsibility will be accepted for late, lost, stolen, misdirected or damaged
product.
7. Please allow 4-6 weeks to receive your refund by check.
Contains a Listed Adaptor
Weekly:
1.
Perform the daily cleaning steps 1 and 2.
2.
Remove the cover from the hair pocket assembly. (Diagram D)
3.
Release the inner cutter lock by sliding out of support. (Diagram E)
4.
Remove the inner cutter carrier away from the cutters. (Diagram E)
5.
Remove the cutters. (Diagram F)
6.
Thoroughly rinse away any debris from inner and outer cutters. (Diagram G)
7.
Replace the inner cutters by matching the color of the inner cutters to the
corresponding outer cutter hub. (Diagram H)
8.
Place inner cutter lock back into position by sliding it back into the support until it
snaps into place. (Diagram I)
9.
Lubricate each cutter with household oil.
10
. Snap head assembly back onto neck/hair pocket.
LUBRICATING TEETH
•
Lubricate the teeth of the Pop-up trimmer and the Grooming head every six
months with a drop of sewing machine oil.
CLEANING GROOMING HEAD
•
The easiest and most hygienic way to clean the grooming head is by rinsing the
head after use with warm water. A cleaning brush can also be used to remove
cut hair from the blades.
Cleaning and Care
D
E
F
G
H
I
