8
Beard Trimmer:
1.
To remove the shaver head, simply pull upwards from the neck of the
shaver for easy release.
2.
To attach the beard trimmer attachment, align it with the neck
attachment cavity so that it clips into position.
Note: The beard trimmer’s micro setting zoom comb can be adjusted to suit
your required length setting type of between 2-6mm. The setting can be
adjusted by turning the wheel either left or right.
•
Without the beard comb attachment, the length of hair cut will be
0.4mm.
Stubble Styler
The Stubble Styler comb is designed to help you maintain a 3-day stubble
look. Please be aware that you cannot shave a full long beard down to
stubble length with the stubble styler.
To achieve the look:
•
Clean shave your face initially and then let your beard grow for two or
three days.
•
Attach the stubble styler to the cutting head of the shaver.
•
Shave your face with slow, rotating motions. The stubble guard will
only trim hairs that are over 1.5 mm in length.
•
Shave with the stubble styler at least every two days to maintain the
length and do not allow hairs to get too long.
•
Detach the stubble styler if you wish to have a clean shave look on
your neck or other areas of your face where you do not want stubble
showing.
Tips: Faster growing areas of your beard will begin to be trimmed first.
Slower growing areas of your beard will fill in over a period of a few days or
weeks.
Summary of Contents for ULTIMATE R9 SERIES
Page 9: ......
