Daily Cleaning:
1.
Locate the detachment grooves on the head & cutter assembly. Gently
pull to detach the hair pocket from the neck assembly. (Diagram H)
2.
Tap out excess hair shavings.
3.
Rinse the head of the shaver in running water.
4.
Gently reattach the hair pocket to the neck assembly until it locks in
place on all three sides. The hair pocket may be reattached in any
configuration.
Cleaning Beard Trimmer Attachment
1.
Clean the beard trimmer attachment with the cleaning brush provided,
brush away hair clippings from the blades, and top of trimmer handle.
Note: If you rinse the beard trimmer attachment with cool or warm water
(never use hot water) or use it in the shower then the blades will need to
be lubricated with light-grade oil or sewing machine oil (1-2 drops over the
cutters) every month.
REPLACING THE HEAD & CUTTERS
Please refer to the specifications’ table on page 5 of this manual that lists
the correct replacement part number for your shaver.
It is very important to replace your head and cutters when necessary to
ensure a close, comfortable shave without irritation. We recommend they
be replaced every 6 months. Here are some signs of head and cutter wear,
indicating that replacement is needed:
•
Irritation:
As the heads get excessively worn you may experience
some skin irritation. This would be especially noticeable when you
apply moisturizing lotion.
•
Pulling:
When the cutters wear you may feel a sense of pulling and a
loss of closeness when you shave. This is an indication that it is time
to replace your heads and cutters.
Replacement heads & cutters may be obtained from your local retailer, or
directly from Remington
®
. Simply fill out the enclosed accessory order form
- refer to page 9 & 10, or alternatively your order can be processed over the
phone via the Remington
®
Service Hotline.
13
H
Summary of Contents for ULTIMATE R9 SERIES
Page 9: ......
