![background image](http://html1.mh-extra.com/html/remington/titanium-pg-350/titanium-pg-350_use-and-care-manual_1437666009.webp)
• Turn the groomer’s power switch ON and begin trimming.
• Start trimming under your chin, and following your jawbone
line. Work toward your ear and upper beard line using an
upward motion. Allow the hair length attachment to follow
the contour of your face.
• When finished trimming, turn the power to OFF.
To Trim The Edge Of The Moustaches
• Moustache hairs should be dry.
• Use a small comb to comb the hairs straight for trimming.
Hold the groomer with either the 20mm or 30mm trimmer
blade facing you.
• Trim hairs using a downward motion following the direction
of your hair growth or trim against your hair growth,
whichever is preferred.
NOTE:
Since all hairs do not grow in the same direction, you
may want to try different trimming methods (i.e. upwards,
downwards or across). Practice is best for optimum results.
• After achieving the desired length, use a downward motion
to blend moustache hairs.
• When finished trimming, turn the power to OFF.
NOTE:
Use slow light pressure. Too much pressure may trim off
more hair than desired.
To Trim Sideburns
• Comb sideburns following the direction of your hair growth.
• Hold the groomer vertically with either the 20mm or 30mm
trimmer blade facing you.
• Trim sideburns using a downward motion. After trimming,
lightly go over the trimmed areas with the MicroScreen
®
shaver foil attachment to remove any short hairs remaining
and to get a smooth clean finish.