Line Cord Safety Tips
NOTE: This appliance has a polarized
plug (one blade is wider than the
other). As a safety feature, this plug
will fit in a polarized outlet only one
way. If the plug does not fit fully in
the outlet, reverse the plug.
If it still does not fit, contact a quali-
fied electrician. Do not attempt to
defeat this safety feature.
1.
To insert plug, grasp it firmly and
guide it into outlet.
2.
To disconnect the appliance, grasp
the plug and remove it from outlet.
Do not pull or yank on the cord or
appliance.
Do not wrap the cord
around the appliance.
Blade Care
The life of your clippers will depend
on frequency of use, care, hair type
and condition. The HC-921 blades
are lubed for life and do not require
additional oiling.
Before Cutting Hair
1.
Make sure your hair clipper is
runnning smoothly with a slight
vibration.
2.
Place the cape around the neck
of the person whose hair is being
trimmed or cut.
3.
This person should be seated so
that the top of their head is at your
eye level.
4.
Comb the hair as it is normally
styled.
6
5.
Comb out all knots and tangles.
6.
Ensure the hair is dry. Hair clippers
perform best with dry hair, making
it easier to see how much hair is
being cut.
7.
Hold the hair clipper in the palm of
one hand with your thumb resting
firmly on the top of the hair clipper.
This grip provides comfortable
cutting control. Although the hair
clipper may
be used with
the left or
right hand,
using it
right-handed
allows you to
access the
taper lever
more easily.
To Attach Trimming Guides
1.
Select the trimming guide that
matches the length you want
the hair to be after the cut. The
trimming guides are numbered
and marked with 1/8” (3mm),
1/4” (6mm), 3/8” (9mm), 1/2”
(12mm), 5/8”(16mm), 3/4”(18mm),
7/8”(22mm), and 1”(25mm). See
preceding chart to determine which
combs your model contains.
2.
While the clipper is off, hold the
trimming guide with the teeth up.
Slide the trimming guide onto the
blades until it locks into place.
How to Use
