![background image](http://html1.mh-extra.com/html/remington/silentdrive-rem-150t-sdr-b/silentdrive-rem-150t-sdr-b_users-manual-and-operating-instructions_1438390005.webp)
© 2019 Pinnacle Climate Technologies, Inc.
Silent Drive Forced Air Heater User’s Manual
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
5
1. Insert axle through holes in wheel support.
2. Slide then spacer onto axle.
3. Slide wheel onto axle and hold in place with the axle
nuts. (See Figure 1).
4. Place heater on wheel support frame and line up holes
on the fuel tank lip.
5. Attach front handle with (4) long screws
(50 mm) and (4) nuts through the second and third
hole from the front on both sides of the tank lip and
wheel support frame and tighten firmly.
6. Insert (2) short screws (30 mm) through the first hole
the front of in the tank lip and tighten firmly. Make
certain all (6) screws are secure.
7. Attach rear handle with (4) long screws (50 mm) and
(4) nuts through the first and second hole from the
rear on both sides of the tank lip and wheel support
frame and tighten firmly.
8. Attach front guard with the included hardware.
ASSEMBLY INSTRUCTIONS
Models: 150T-SDR / 220T-SDR
Figure 1
Axle
Axle Nut
Spacer
Tire
Wheel Support Frame
Figure 2
Handle
Wheel Support Frame
Safety Guard
FEATURES
Control Panel
Shell
Wheel
Fuel Gauge
Fuel Cap
Fuel Tank
Drain Bolt
Support Frame
Power Cord
Handle
Rear Guard