Remington RX7 Ultimate Series, Manual

Page: 5 / 124

5
ENGLISH
INSTRUCTIONS FOR USE
1. Hold the head shaver body in the palm of your hand. Press the on/off button to turn
the head shaver on.
2. Press the cutting heads against your scalp. It is not necessary to press hard to shave.
Pressing hard does not cut closer and could increase irritation. The cutting head will
flex to follow the contours of your head.
3. Move the shaver slowly around your head. You may use linear or circular strokes,
whichever works best for your hair.
4. Use a hand held mirror to check the back of your head to confirm a complete and
thorough shave. You may also use your other hand to feel for complete and consistent
cutting.
5. We do not recommend that you use this product on facial hair.
6. When finished turn the shaver off.
TURBO FEATURE
Use the Turbo feature to shave thick hair. Press the turbo button to operate the shaver in
Turbo mode. The charging indicator light pattern will speed up. Press the turbo button
again to deactivate turbo mode.
TIPS
• Do not attempt to shave head hair that is longer than 4 days growth or 2.0 mm. Your
head shaver is intended to maintain a shaved look and can be used daily or every two
or three days.
• If your hair is longer than 2.0 mm you should trim it down with a hair clipper first
before using your head shaver.
• Your head shaver can be used dry or it can be used with shaving cream or gel in the
shower.
TRIMMING
The pop-up trimmer is located at the top of the shaver body. It can be used for trimming
edges of beards, sideburns or ears.
1.
To activate the trimmer, turn the shaver on then raise the trimmer by sliding the
trimmer release button.
2. Use cutting strokes in the direction opposite to the direction that the trimmer folds
away.
3. When finished fold the trimmer into its stored position.
GB
DE
NL
FR
ES
IT
DK
SE
NO
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
RS
UA
BG
AE