ABOUT YOUR HAIR CLIPPER
HC7110AU Specifications
Power System
Cord/Cordless (Rechargeable)
Initial Charge Time
24 Hours
Full Charge Time
18 – 20 Hours
Run Time
40 Minutes
Indicators
Charging
Voltage Type
Single
Power System:
Cord/Cordless – can be used with or without the power
cord.
Charging Indicator:
red light that glows when the hair clipper is being
charged.
Voltage Type:
Single – 220-240V only.
CHARGING YOUR HAIR CLIPPER
Cordless Use
•
Before using your hair clipper for the first time, charge it for 24 hours.
•
Ensure the product is switched off.
•
Connect the charging adaptor to the product and then to the mains.
The charging LED light will display on the clipper.
•
If the product is not going to be used for an extended period of time
(2-3 months), unplug it from the mains and store.
•
Fully recharge your hair clipper when you would like to use it again.
•
It is not recommended to use this hair clipper directly from the power
outlet when it has been fully charged, however, while using the hair
clipper in cordless mode if there is a noticeable drop in power, you can
use the hair clipper directly from the power outlet.
•
To preserve the life of your batteries, let them run out every six months
then recharge for 24 hours.
Corded Use
•
Connect the charging adaptor to the product and then to the mains.
•
When the cord is connected to the mains, a charging LED light is
displayed on the hair clipper.
Caution:
Extended mains (corded) only use will result in the reduction of
the battery life.
5
