7
29 Avoid inserting the cutting unit more than 6mm into your nostril or ear.
,
TO REMOVE HAIR FROM EYEBROWS
30 Attach nose, ear, eyebrow attachment.
31 Gently guide the cutting unit to stray, unwanted hairs along the eyebrow
line or protruding from the eyebrow itself.
32 To remove the hairs completely lower onto the skin and move over the
desired area.
33 Use slow and well controlled movements.
,
TRIMMING BODY HAIR
34 Attach the body hair trimmer attachment head.
35 To achieve the desired hair length, change the guide comb by easily
sliding it onto one of the three slots on the attachment head. The different
slots represent 3mm, 6mm and 9mm hair lengths.
36 Place the flat top of the trimmer comb against the skin. Slowly slide the
trimmer through the hair, in the direction of hair growth.
37 Use slow and well controlled movements.
38 If hair builds up in the guide comb during the trimming process, switch
the unit off and pull off the guide comb. Brush the trimmer and rinse the
comb.
,
Note: the wide trimmer can also be used to trim body hair. This wide
trimmer head contains the vacuum technology to conveniently collect
trimmed hair in the vacuum chamber.
39 Regularly check the level of collected hair in the vacuum chamber. Once
this becomes full, switch off the beard trimmer and then remove the
vacuum chamber to empty the hair clippings. To continue using, slot the
vacuum chamber back into product and then slide on the power switch.
E
Tips for best results
•
Beard, moustache and sideburn hairs should be dry.
•
Avoid using lotions before use.
•
If you are trimming for the first time start with the maximum comb length
setting.
C
CARE FOR YOUR BEARD TRIMMER
•
Your beard trimmer is fitted with high quality blades.
•
To ensure long lasting performance of your clipper, clean the blades and
unit regularly.
