![background image](http://html1.mh-extra.com/html/remington/pg6070/pg6070_manual_1437483004.webp)
4
9
Adjustable beard comb 2 – 16mm, 2mm adjustment
10 4 attachment guide combs: 3, 6, 9, 12mm
11 Charging indicator light
12 Power port
13 Stand
14 Body hair trimmer attachment (note: vacuum technology does not feature
on body hair trimmer attachment).
15 Nose and ear hair trimmer attachment
16 Adaptor (not shown)
17 Storage case (not shown)
,
VACUUM FEATURE
The vacuum technology captures virtually all the
facial hair as it is cut. The hairs are vacuumed into an easy
empty vacuum chamber located on the front of the beard
trimmer. It is recommended that you empty the vacuum
chamber after each use by sliding out the section away
from the beard trimmer (Fig. A).
C
GETTING STARTED
,
CHARGING YOUR APPLIANCE
•
Ensure the product is switched off.
•
Connect the charging adaptor to the product and then to the mains.
•
Before using your beard and grooming kit for the first time, charge the unit
for 4-6 hours for optimal performance. Typical charge time will be 4 hours
thereafter.
•
When charging the LED charge indicator will turn blue. The blue light will
turn off after charging is complete.
•
To preserve the life of your batteries, let them run out every 6 months then
recharge for 4 hours.
•
This appliance should be charged by approved safety isolating adaptors
PA-0510E (for EU version) or PA-0510U (for UK version) with the output
capacity of 5.0V dc; 1A;
,
CORDLESS USE
,
Please note that this product is cordless use only and cannot be used when
connected to the mains.
•
When the unit is switched on and fully charged, the product can be used in
cordless mode for up to 60 minutes.
WARNING: Keep the appliance dry.
Fig. A