5
115038
www.desatech.com
5. Insert tab of sprocket cover into slot on unibody and
rotate sprocket cover onto guide bar bolt until
sprocket cover rests against guide bar (see Figure 5).
ASSEMBLY
Continued
Continued
Figure 5 - Installing Sprocket Cover
Step
1
Step
2
Guide Bar Bolt
Bushing
Guide Bar Nut
Sprocket Cover Tab
Slot
Adjusting Hole
6. Place guide bar nut, removed in step 2, on guide
bar bolt.
IMPORTANT:
Tighten guide bar nut finger tight only.
7. Turning chain tensioning screw, adjust position of ad-
justment block until it is aligned and inserted into the
round adjusting hole on guide bar (see Figures 5 and
6). Turning screw counterclockwise will move adjust-
ment block to rear of guide bar. Turning screw clock-
wise will move adjustment block to front of guide bar.
Figure 6 - Chain Tensioning Screw and Adjust-
ment Block Location
T
I
G
H
T
EN
LO
O
S
E
N
Chain Tensioning
Screw
Adjustment Block
