4
C
GETTING STARTED
• Before the unit can be used for the first time, keep hands away from touch
screen area and pull out the plastic tab marked with an arrow from the
bottom of the unit. The plastic tab is only for shipping and can be discarded.
,
CHARGING YOUR APPLIANCE
• Before using your hair clipper for the first time, charge for 90 minutes.
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains. The
charging indicator will illuminate. When fully charged, the display screen turns
off.
• Your trimmer cannot be overcharged. However, if the product is not going to
be used for an extended period of time (2-3 months), unplug it from the mains
and store.
• Fully recharge your appliance when you would like to use it again.
• To preserve the life of your batteries, let them run out every 6 months then
recharge for 90 minutes.
,
CHARGING VIA STANDARD ELECTRICAL SOCKET
• Ensure the product is switched off.
• Connect the charging adaptor to the product and then to the mains.
• When charging the digital display will illuminate.
• Allow 90 minutes for a complete charge.
• This appliance should be charged by approved safety isolating adaptors
PA-0510E (for EU version) or PA-0510U (for UK version) with the output
capacity of 5.0V dc; 1A;
,
USB CHARGING VIA PC
• Ensure the product is switched off.
• Connect your USB cable to the USB port on the PC.
• Connect the USB cable to your beard trimmer.
• When charging the digital display will illuminate.
• Allow 90 minutes for a complete charge.
,
CORDED USE
• Connect the charging adaptor to the product then to the mains.
• When the cord is connected to the mains, a digital display will be displayed on
the appliance.
ENGLISH